Uploading starts at other times than when performing operations* to upload to the cloud.

Check that the camera is set to the correct date and time. In addition to normal upload start operations*, uploading may also start at the following times, depending on the network environment or the camera’s network usage.
*Upload start operations will vary depending on the camera you are using and the upload destination (setting the camera’s power switch from OFF to ON, or selecting [Cloud Connection] in the camera menu, etc.)

• When [Cloud Connection] is changed from [Off] to [On] in the camera MENU.
• When operations such as the following are performed with [Cloud Connection] set to [On] in the camera MENU.
  • Disconnecting the cable after ending USB connection.
  • Changing [Wi-Fi Connect] from [Off] to [On] in the camera MENU.
  • Changing [Airplane Mode] from [On] to [Off] in the camera MENU.
  • Temporarily disconnecting and then resuming the network connection.
  • Using and then exiting another app (Transfer & Tagging or Creators' App for enterprise).
• When the connection between Creators' App and the camera is changed from a connection that does not go through an access point to one that goes through an access point (you can check this on the Camera screen of Creators' App).